Add to Cart View # BKM6004 The "Mohawk" moniker is the NYC's name for the 4-8-2 wheel arrangement (four pilot wheels, eight coupled driving wheels, and two trailing wheels). Conventionally, this type is known as a Mountain. The NYC decided to name them after the Mohawk river, which ran along their water level route, where the Mohawks were intended to run. The L-2a came about when the NYC wanted a locomotive to haul trains faster than their H10 class 2-8-2's. This new engine needed to be not only faster but larger as well, and it was found the previous generation of Mohawk, the L-1, had room to grow. Primary goals included achieving more power through minimum fuel consumption and weight. Height and width was also taken into account. The NYC's locomotives were designed to tighter clearances than most other lines, which is reflected on the L-2a and most of their other classes. One prototype L-2a, #2700, was delivered in March, 1925 and featured a number of details that were not standard to NYC locomotives. The railroad learned from this prototype and went on to order 99 production locomotives, 2701-2799, from American Locomotive Company, or ALCO, which were delivered roughly in the first five months of 1926 and remained in service into the early 1950's. The L-2a class sports 69" driving wheels with a cylinder bore and stroke of 27"x30" and an 84' - 7" wheelbase including the tender. The L-2a's were also delivered with a booster trailing truck, which included cylinders powering that wheel for extra assistance when starting a train. The L-2'as were delivered with a 21 ton coal capacity in the tender. Notes from BMR Designer Glenn Holland: All of the details mentioned above I have accurately represented on my model. I modeled locomotive #2743 specifically, reflecting some unique piping arrangements from other engines, including booster engine detail and the classic Elesco feedwater heater sitting atop the front of the smokebox, a key feature of NYC freight locomotives, and this class in particular. Most of the L-2a's received an upgraded coal capacity tender, moving to 25 tons. I have modeled this as it better represents the class; less than ten locomotives did NOT receive this upgrade. The model uses 2 Power Functions L motors and 2 IR receivers, allowing each motor to operate at full capacity. Both motors are powered from a custom 7.4V battery which offers a performance increase over the standard Power Functions AAA and Rechargeable battery. The connecting rods and Baker valve gear is custom parts modeled by myself using original blueprints and perfected for operation by Brickmania. It is a more accurate representation of Baker valve gear motion than I have achieved previously. The boiler and cab can be easily removed for servicing the motors. The power train is built up from the S160 design and has proven to be just as capable and strong. I've run this engine around my floor continuously and I have yet to have a problem with it. The L-2a has been on my project list for many years, being one of my favorite NYC freight locomotives and I'm glad to be able to start working more closely with Brickmania on railroad kits and also glad that I could start things off with this awesome example of 1920's fast freight power. All Brickmania® model kits are made of new-condition LEGO® bricks. This model comes disassembled an includes complete printed building. This is a limited-edition kit and production may be discontinued at any time. This is not a LEGO® Product. LEGO and the LEGO minifigure are trademarks of the LEGO Group, which does not sponsor, authorize or endorse this product. The LEGO Group is not liable for any loss, injury or damage arising from the use or misuse of this product.

Add to Cart View # BKM6006 A New York Central Caboose kit designed by BMR's Cale Leiphart and standardized by Brickmania's Mary Wilson. Model includes and detailed interior and exterior, with custom printed elements, and custom minifigure. Both Studly Trains Neodymium and BMR Couplers are included with this set, making it versatile and adaptable to your existing setup. Wheels and axles are by BrickTracks. All Brickmania® model kits are made of new-condition LEGO® bricks. This model comes disassembled an includes complete printed building. This is a limited-edition kit and production may be discontinued at any time. This is not a LEGO® Product. LEGO and the LEGO minifigure are trademarks of the LEGO Group, which does not sponsor, authorize or endorse this product. The LEGO Group is not liable for any loss, injury or damage arising from the use or misuse of this product.

Add to Cart View # Workshop Machinist The Workshop Machinist was part of a promotion bundle of workshop kits in March 2016 and has never been separately available for sale. Till now! We have a few minifigures available and once these are gone they'll never come back again!!

View The BrickArms Pickelhaube helmets! Perfect for adding extra detail for your minifigures. BrickArms Pickelhaube comes with a removable brass colored spike. Available in Black, Gunmetal, Olive and OD Green

View The BrickArms Pickelhaube helmets! Perfect for adding extra detail for your mini figures. BrickArms Pickelhaube comes with a removable brass colored spike. Available in Black, Gunmetal, Olive and OD Green

Add to Cart View The Pacific Theater was a major battlefield of World War II, where the Allies combatted the aggressive advances of Imperial Japan on land, at sea, and in the air. The Japanese assault on Pearl Harbor unleashed the combined fury of North American and South Pacific Allies. Within these pages you will find some of the most frequently used vehicles of the Pacific Theater, carefully recreated with LEGO® bricks. Each build includes full-color, step-by-step instructions for building 11 Allied and Imperial Japanese military models from WWII. Included in this volume are: Type 95 “Ha-Go” Light Tank Type 97 “Chi-Ha” Medium Tank Type 1 47mm Anti-Tank Gun Type 92 70mm Battalion Gun A6M Zero Coastal Defense Battery M2A4 Stuart Light Tank M4A2 Sherman Medium Tank LVT-4 “Amtrac” M1A1 75mm Howitzer P-40 Warhawk Bonus Extras: Printed on heavy-weight glossy paper and has a special lay-flat spiral wire binding Also included is a vinyl sticker sheet with vehicle markings, insignia, and uniforms for 20 figures Each model includes a parts list to help locate all of the parts needed to build your model Beautiful full-color photographs throughout the book, filled with ideas for displaying your models.

View The BrickArms Pickelhaube helmets! Perfect for adding extra detail for your mini figures. BrickArms Pickelhaube comes with a removable brass colored spike. Available in Black, Gunmetal, Olive and OD Green

View The BrickArms Pickelhaube helmets! Perfect for adding extra detail for your mini figures. BrickArms Pickelhaube comes with a removable brass colored spike. Available in Black, Gunmetal, Olive and OD Green

Add to Cart View

M24 Grenade - Reloaded

Add to Cart View # BKM9011 Take your crew where no one has gone before! Built in the distant future, the Starfleet Constitution-Class Cruiser is fitted with a warp-drive system that allows it to move faster than light. Its sleek design, advanced weaponry, and experienced crew make it a formidable opponent in combat. Built to 1/1500th scale, this impressive Cruiser also features a detachable saucer section and sticker decals for identification. Stand included to display this majestic ship in your collection. Specifications: Deployed: 2245 C.E. Crew: 430 Armaments: Forward energy banks, energy torpedoes Propulsion: 2x Warp-Drive Engines The Starfleet Constitution Class Cruiser kit comes with the following features: 1/1500 scale Brickmania model Separating Saucer Section Custom Printed name and number Identification Stickers for several popular starships Certificate of Authenticity signed by Designer, John Canepa Includes 106 genuine new-condition LEGO® elements Intermediate Skill Level (4-6 years of experience with LEGO is recommended) All Brickmania model kits are made of new-condition LEGO bricks. This model comes disassembled and includes complete printed building instructions and comes packaged in a sealed box. This is a limited-edition kit and production may be discontinued at any time.

View The BrickArms Fallschirmjäger helmets! Perfect for adding extra detail for your mini figures. Paratroopers are ready to dive into battle with the BrickArms Fallschirmjäger Stahlhelm! Available in Black, Gunmetal, Sand Blue and OD Green

View The BrickArms Fallschirmjäger helmets! Perfect for adding extra detail for your mini figures. Paratroopers are ready to dive into battle with the BrickArms Fallschirmjäger Stahlhelm! Available in Black, Gunmetal, Sand Blue and OD Green

Add to Cart View # BKM712 The P-47 was the largest single-seat, single-engine fighter used in World War II. It was developed by Republic Aviation and was the first aircraft equipped with the powerful Pratt and Whitney R-2800 Double Wasp radial engine (later used in the Navy’s F6F Hellcat and F4U Corsair fighters). The Thunderbolt featured thick armor protection for the pilot and was heavily armed with eight .50 caliber Browning M2 machine guns and up to 2500 pounds of rockets or bombs. With the addition of external drop tanks, the P-47 was able to provide fighter escort to bomber formations deep into enemy occupied Europe. While the P-47 was a competent air-to-air fighter, it’s massive firepower and speed made it an ideal ground attack aircraft. It’s prowess for hunting tanks made it the scourge of German panzer forces in Europe, forcing them to stay hidden during daylight hours. Ground attack versions of the P-47 were delivered to the European Theater of Operations in time for the D-Day Invasions, for which all Allied aircraft were painted with characteristic black and white “invasion stripes.” More than 15,000 were built during World War II, making it a close rival of the P-51 Mustang for most widely used American fighter aircraft of the war. P-47 Thunderbolt Vital Statistics Length:36 ft 1 in (11.00 m) Wingspan:40 ft 9 in (12.42 m) Height: 14 ft 8 in (4.47 m) Weight: Empty: 10,000 lb (4,535 kg) Loaded: 12,731 lb (5,774.48 kg) Armament: 8x Browning .50 cal M2 Machine guns, up to 10x 5” (127mm) rockets, up to 2500 pounds of bombs Speed: 443 mph at 29,000 ft (713 km/h at 8,839 m) Range 800 mi combat, 1,800 mi ferry (1,290 km / 2,900 km) Service ceiling:43,000 ft (13,100 m) Years Produced:1941-4 Additional information about this Brickmania custom Lego® kit: The P-47 Thunderbolt Mini-kit has the following features 42 new-condition, genuine LEGO® elements 1/100th Scale Sophomore Skill Level (2-4 years experience with LEGO is recommended) All Brickmania model kits are made of new-condition elements from LEGO and BrickArms. This model comes disassembled, includes printed building instructions, and comes packaged in a sealed box. This is a limited edition kit and production may be discontinued at any time.

View The BrickArms Fallschirmjäger helmets! Perfect for adding extra detail for your mini figures. Paratroopers are ready to dive into battle with the BrickArms Fallschirmjäger Stahlhelm! Available in Black, Gunmetal, Sand Blue and OD Green